2007 Koenigsegg CCX

Koenigsegg has announced plans to unveil new new 2007 CCX, also at the Geneva show. It will have 806 horsepower, weigh just 2200 lbs, and reach 62 mph in 3.2 seconds. It is also expected to run the quarter mile in just nine seconds. The car will cost $650,000 - staggering price, but about half the price of the Bugatti Veyron.

The CCX is the latest iteration of the Koenigsegg CC family. The CCX is in many aspects a new car since it has been re-engineered to comply with the US regulation and market demands. Still, it has been a key issue for the Koenigsegg Team to keep the distinctive and record breaking CC shape. We believe it is important to avoid trends and instead hone the aerodynamic shape of the CC range for the future, only enhancing its unique look and appearance with tighter lines and a more aggressive stance. We also believe in continuity. A new Koenigsegg shall show a clear lineage from its predecessor and shall not follow any other design trends - but enhance its already proven concept and shape to perfection.

CCX stands for Competition Coupe X. The CCX commemorates the 10th anniversary of the completion and test drive of the first CC maiden prototype, which rolled out from the R&D Department in 1996.

Body and Interior
The CCX features a completely new set of body and interior parts. The new body incorporates a new front bumper design, engineered to function well in the stringent 2.5 mph bumper test, including enhanced brake cooling, fog lamps and US side position lights. The front lamps have been slightly redesigned to suit the new bumper line.

There is a new scoop on the front bonnet acting as a larger fresh air-intake for the occupants and new air vents have been added behind the front wheels in order to further evacuate air from the cockpit. The frontal shape revisions now allow for effective track use options to be added. The side rocker panels feature side skirts in order to further enhance downforce by increasing underbody area. The new exterior of the car has been created using the industry leading Icem Surf CAD software, guaranteeing a perfect fit and finish as well as optimal highlights.

The car is 88 mm longer in order to comply with the US rear impact regulations and in order to free up space around the rear muffler. The rear clamshell now features a glass window over the new CCX engine, clearly showing off the bespoke and unique Koenigsegg Block casting. The mufflers have received improved cooling, by incorporating grill vents above in the clamshell. The number plate area is now adapted to suit both US and Euro size number plates.

Space
There is a further 50 mm in headroom, making the CCX the most spacious super car on the market, truly considering the taller driver’s needs. Koenigsegg believes to have found a niche by enabling really tall drivers to fit well inside the car, still with its highest point only 1120mm above the tarmac.

Seats
In corporation with Sparco, and Koenigsegg test driver Loris Bicocchi, Koenigsegg has developed a new seat design for the CCX. The structures of the seat are still carbon fibre, but now feature fully padded front surface and a tilting backrest. The striking and very comfortable Tempur padded CCR seats can still be fitted in the CCX on special order.

The optional ceramic 382 mm front discs are coupled to 8 - piston callipers and in the rear the 362 mm size is retained with 6 piston callipers. The optional industry first carbon fibre wheels save another 3 kg per wheel compared to the already lightweight magnesium wheels that come as standard. The ceramic discs save another 2 kg per wheel, giving the Koenigsegg CCX lower unsprung weight than any other super car.

Koenigsegg now also offers the ceramic discs and carbon wheel upgrade to all previous Koenigsegg models. Aerodynamic Enhancement

Between the raised speedster humps there is a new type of vortex generator originally conceived and patented by Torbjörn Gustavsson at Vortaflow and implemented as a Ram Air engine booster by Christian Koenigsegg on the CCX. Due to the fact that there is a fresh air engine intake right below the rear window, the vortex generator redirects the air directly into the air intake and thereby creating a positive pressure in the air box. To normally obtain this phenomenon in a mid engine car a roof scoop is required, increasing frontal area. In the case of the CCX, the small frontal area can still be kept and reward visibility is unaffected, even though it has now got a true ram air intake over its mid mounted engine.

Electronics
The CCX now features wholly digital, intelligent fuse and relay unit. This means that there are not physical fuses or relays as such. The unit is programmable and is can-bus connected to a display unit which sends crucial information to the driver. The main advantages of this system are its reliability, light weight, small physical size, programmability and direct information to the driver. The system is prepared for future upgrades and functions.




Unique Koenigsegg Engine
The Engine in the Koenigsegg CCX retains the incredible performance and power of the CCR engine, while running on US 91 octane fuel and complying with California emission regulations. In order to reach this challenging goal, extensive rework had to be done to emission related items, such as new cylinder heads with larger valve area and more optimally flowing cylinder head ports. Dual smaller injectors per cylinder were integrated, as well as new camshafts, a new carbonfiber individual runner intake plenum, a new engine management system, updated fuel and EVAP system. New exhaust system where the catalytic converters are moved closer to the engine for earlier light-off time. A returnless fuel system has also been implemented with pumps integrated into the new fuel tank. All in all, a heavy rework in order to retain the unique performance of the CCR engine and at the same time comply with the strictest emission regulations in the world.

The new and cleaner CCX engine also incorporates the first engine block design that is specifically created and cast for Koenigsegg, with the Koenigsegg shield embossed in the casting on both left and right side of the engine block. This new block design is an all aluminium construction made out of 356 aluminium with a T7 heat treat that has undergone a High Intensity Pressure process in order to further enhance block integrity as well as a cylinder bore chill during casting. The new block reaffirms the future development of Koenigsegg engines and makes Koenigsegg stand out among low volume super car manufacturers, due to the fact that Koenigsegg engineer the engine completely in house in combination with the fact that it is also built, assembled, and dyno tested in the Koenigsegg production plant. The Koenigsegg Engineers also incorporated the most powerful internal piston coolers in the industry - bringing down the piston temperature by as much as 80% more than competing systems, which was a must in order to run high cylinder pressure with 91 octane fuel.

2007 Pagani Zonda R

Pagani Zonda Goes Racing

While one certainly cannot say the Zonda F lacks performance figures, driving around the Nurburgring in 7:32 and achieving lateral G forces of almost 1.5 G, it is however a road car, easy to drive, intuitive and setting the benchmark for comfort, safety and lightweight. Paired with a quality finish and the attention to detail this made the Zonda F one of the most desirable supercars resulting in the 25 Coupe models being sold out in record time. This did not seem to fulfill the requirements of our most demanding customers, who adore the weekend drive on a racetrack.

The spark has been set by an Italo-American customer, enthusiast and already proud owner of 3 Zondas. He describes the project this way: “The thought has been on my mind for quite some time, but I am not interested in racing”.

The Zonda R is born with full liberty. The target: the ultimate performance at the racetrack without any implications of rules, except for safety, where no compromise is allowed. In September 2006 the first drawings were ready, but it was crucial to have the support of Mercedes-AMG for a high revving engine with a power output of 750 bhp, dry sump, light and with a low center of gravity. The basis was the self supporting engine of the mighty CLK GTR, which has dominated the GT championships.

Eve at constant racing pace the engine would have to cover over 3100 miles (5000 kilometers) before servicing.

The Zonda R is a car designed from scratch, with only 10% of the Zonda F components to be carried over. The suspension forged in Avional, a new Pagani six speed transversal sequential gearbox, carbon-fiber monocoque, aeronautical four pump fuel tank are only part of the equation.

The wheelbase has grown by 2 inches, the overall length by 5 inches and the track is increased by 2 inches. The bodywork and aerodynamics have been studied to offer maximum downforce. Even though built for the track, the project would not have received kick off, if the quality and finish of the car and its details was not up to the level of the Pagani road cars.

One of the first cars to be delivered however will be kept in a living room, designed by Pagani and built with the same materials as the Zonda F, beautifully textured carbon-fiber, avional, titanium, inconel and other state of the art materials. Additionally it will feature a bespoke HiFi System that will allow the customer to listen to the sound of this car at Le Mans and the Nurburgring.

The Pagani customers who have ordered the Zonda R will be relieved of almost $1,6 million + taxes.

The Track is its Home

This Zonda is purpose made for track use, without restrictions of any competition rules or homologation, with the only exclusion of the passengers’ integrity, where no compromise is tolerated.

A New Heart

The engine is built by the racing specialists at Mercedes AMG, where the championship winning DTM cars are born, as well as the CLK GTR, probably the most devastating and effective weapon ever to compete in the GT series. From it’s engine the Zonda R borrows the basic architecture including an ingenious dry sump allowing a low centre of gravity. This self-supporting engine with 750 bhp at 8000 rpm and 425 lb-ft of torque carries a lightweight carbon-fiber high-performance intake system, a racing multiple disc sintered clutch and Formula 1 style exhaust system, hydroformed in Inconel 625 and ceramic coated for optimal heat dissipation. The power unit combined with a 6 speed transversal manual sequential synchronized gearbox is designed to satisfy the most ambitious drivers.

The Chassis

The central carbon chassis will incorporate a roll cage and a rubber racing fuel tank with 4 fuel pumps and quick refuel filler like on GT race cars. The wheelbase has been increased by 2 inches to offer the best stability. The front and rear subframes are brand-new, built to accommodate a new suspension geometry, produced in avional. The magnesium forged rims with central wheel nut and a quick pneumatic lifting system allows fast and effortless changes of the slick tires.

Bodywork and Aerodynamics

The new bodywork has been honed to offer elevated downforce even in low speed corners. The longer front bonnet with flaps, closed underbody and the rear overhang with the adjustable rear wing and race derived diffuser translate into shattering aerodynamic efficiency and will let you experience cornering speeds beyond imagination. The car displays and logs information about the amount of dowforce that the car is generating at each moment. Combined with the adjustable wings you can easily find the best setup for each track.

Workstation

The interior is designed to accommodate the driver and passenger in bespoke seats, built to offer the best support, when the G-forces from the vehicle dynamics come into question. The Digitek instrumentation provides the essential information and a sophisticated telemetry allows through a variety of sensors to monitor every single component of the car.